Skip to content

Transient Accessories

  • CA EFT kit

    The pulse shape of EFT/burst generators designed as per IEC 61000-4-4 have to be verified both into a 50ohm and a 1,000ohm load at the 50ohm coaxial HV output as well into 50ohm load at the output of the coupling network where the DUT is connected when testing mains supply lines. The CA EFT kit includes the load resistors and a set of adapter to connect the coaxial matching resistors appropriately to the DUT output port.

    Keep Reading
  • CA OCS F Kit

    The pulse shape of fast damped oscillatory generator designed as per IEC 61000-4-18 have to be verified both into a 0.1ohm and a 1,000ohm load at the 50ohm coaxial HV output as well into 0.1ohm load at the output of the coupling network. The CA OCCS F kit includes the load resistors and a set of adapter to connect the coaxial matching resistors appropriately to the DUT output port.

    Keep Reading
  • CCI PVKIT 1

    The IEC 61000-4-4 Ed 3.0 published 2012 recomends the calibration of the capacitive coupling clamp into a 50ohm coaxial load. The capacitive coupling clamp (CCI) is connected to the 50 ohm output of the EFT generator. A flexible insulated plate inside the CCI is connected to a coaxial 50 ohm load resistor for verificate the EFT / Burst wave of the capacitive coupling clamp.

    Keep Reading
  • PVF 1000

    Burst calibration resistor 50 Ohm according IEC 61000-4-4

    Keep Reading
  • PVF 50

    Burst calibration resistor 50 Ohm according IEC 61000-4-4

    Keep Reading
  • PVF BKIT 1

    Calibration/kit for burst-generators, acc IEC 61000-4-4

    Keep Reading