Skip to content

GTEM Cells

The GTEM cell is a frequency extended variant of the traditional TEM cell. Designed for EMC applications, calibration of antennas/field probes, testing and measuring of mobile phones, and other electronic devices etc.

  • GTEM 1000

    The GTEM 1000 has a maximum septum height of 1000 mm and is suitable for emissions and immunity testing.

    Keep Reading
  • GTEM 1250

    The GTEM 1250 has a maximum septum height of 1250 mm and is suitable for emissions and immunity testing.

    Keep Reading
  • GTEM 1500

    The GTEM 1500 has a maximum septum height of 1500 mm and is suitable for emissions and immunity testing.

    Keep Reading
  • GTEM 1750

    The GTEM 1750 has a maximum septum height of 1750 mm and is suitable for emissions and immunity testing.

    Keep Reading
  • GTEM 2000

    The GTEM 2000 has a maximum septum height of 2000 mm and is suitable for emissions and immunity testing.

    Keep Reading
  • GTEM 250

    The GTEM 250 has a maximum septum height of 250 mm and is suitable for emissions and immunity testing.

    Keep Reading
  • GTEM 250A SAE

    GTEM Cell for Emissions and Immunity Testing, version for SAE. A GTEM (Gigahertz Transverse Electro Magnetic) cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. Compared to other test sites, GTEM testing is faster with high accuracy and excellent reproducibility. In principle, the GTEM cell is a coaxial line expanding pyramidally and having an impedance of 50 Ω. At its end, the line is terminated by a combination of termination resistors and RF absorbers designed and constructed to match the above mentioned impedance. Teseq offers with GTEM 250A-SAE a cell with excellent VSWR for improved testing in the entire frequency.

    Keep Reading
  • GTEM 250A-V

    GTEM with septum height 250 mm, 100 W, low VSWR, vertical position. Test Cell for Electroacoustics - Hearing Aids IEC 60118-13

    Keep Reading
  • GTEM 500

    The GTEM 500 has a maximum septum height of 500 mm and is suitable for emissions and immunity testing.

    Keep Reading
  • GTEM 750

    The GTEM 750 has a maximum septum height of 750 mm and is suitable for emissions and immunity testing.

    Keep Reading
  • MPC

    XYZ Manipulators are ideal for easily rotating the EUT into the three required orthogonal axis positions. The manual versions (MPH) are installed inside the cell while the remote controlled versions (MPC) have a motor underneath the floor of the cell. GTEMs can be supplied with removable panels to allow the future installation of XYZ Manipulators. The MPC requires factory installation.

    Keep Reading
  • MPH

    XYZ Manipulators are ideal for easily rotating the EUT into the three required orthogonal axis positions. The manual versions (MPH) are installed inside the cell while the remote controlled versions (MPC) have a motor underneath the floor of the cell. GTEMs can be supplied with removable panels to allow the future installation of XYZ Manipulators. The MPC requires factory installation.

    Keep Reading