Skip to content

EM Clamps

The KEMZ 801 is similar to the described EM clamp in the standard IEC/EN 61000-4-6 and injects the disturbance signal through a combination of inductive and capacitive coupling whilst decoupling the AE to values in excess of 10 dB above 10 MHz.

  • KEMZ 801B

    EM Clamp, conform with IEC 61000-4-6 (incl. edition 4 and EN 61000-4-6:2014)

    Keep Reading
  • CAL 801A

    CAL 801A calibration unit for KEMZ 801

    Keep Reading

    Calibration fixture for KEMZ /KEMA. The edition four of IEC 61000-4-6 describes in Annex A a calibration method for measuring the S-parameters of the EM clamp and decoupling clamp. In combination with a vector network analyzer offers the calibration fixture CAL KEMZ to measure impedance and decoupling.

    Keep Reading