Skip to content

Voltage Surge (1,2/50 us)

Voltage surge generator's are used for testing components and safety devices and fulfill the IEC 60255-27, IEC 60747-5, IEC 62052-11 and other international standards. The EM Test VSS 500N series offers a broad choice from 6 up to 16 kV for single or three phase testing.

  • VSS 500N10 Series

    The voltage surge simulator VSS 500N10 generates high voltage transients as required by EN/IEC 60065 and UL 6500 standards for safety tests

    Keep Reading
  • VSS 500N12 Series

    The voltage surge pulses are used to test the isolation (voltage withstand) capability of components, sockets, connectors, cables and many other item

    Keep Reading
  • VSS 500N15 Series

    High voltage transients as required by IEC 60255-27 for transient overvoltage tests on "Protection Relays". Output voltage ranges up to 15 kV. For this kind of testing the IEC 60255-27 standard requires a fixed energy of 0.5 J at each test level.

    Keep Reading
  • VSS 500N6 Series

    High voltage transients as required by IEC 60255-27 with a source impedance of 500ohm for transient overvoltage tests on "Protection Relays". IEC 60255-27 requires a fixed energy of 0.5 J at the 1000 V and 5000 V test levels.

    Keep Reading
  • vsurge NX Family

    The voltage surge generator series vsurge NX is specifically designed to generate high voltage transients as required for insulating testing. The purpose of these tests is to verify that clearances will withstand transient overvoltages. The impulse withst

    Keep Reading