Skip to content

VSS 500N6 Series

  • Surge pulse 1.2/50 us up to 6.6 kV
  • 5 different test levels, (1 & 5 kV; IEC 60255-27)
  • Source impedance 500ohm
  • Constant Energy of 0.5J at each test level
  • Peak voltage/current measurement
  • Spark-over detection
  • Interlock
  • Warning lamp control
  • Overview +


    Voltage surge simulation The surge simulator type VSS 500N6 generates high voltage transients as required by IEC 60255-27 with a source impedance of 500ohm for transient overvoltage tests on "Protection Relays". The output voltage ranges up to 6.6kV, covering for tests levels 1 to 5. The no-load waveshape corresponds to IEC-61180. For this kind of testing the IEC 60255-27 standard requires a fixed energy of 0.5 J at the 1000 V and 5000 V test levels.
  • Datasheets +

  • Standards +


    • IEC / EN Product Standards+

    • ANSI/IEEE Standards+